Custom Acoustic Enclosures for a Production Line in Hungary

Case Studies

22 October 2026

Custom Acoustic Enclosures for a Production Line in Hungary

A photovoltaic manufacturer based in Foshan, China, needed a noise control solution for its production line in Hungary. Soundbox assessed equipment noise at the company’s Foshan facility and developed custom acoustic enclosures based on the project’s requirements.

Project brief

  • Project destination: Hungary
  • Project period: November 2025 – February 2026
  • Application: Industrial production line noise control
  • Solution: Custom acoustic enclosures for three priority noise areas

When Production Noise Becomes a Workplace Challenge

Noise from the production line in Hungary had led to complaints from nearby office employees, prompting local authorities to require noise control measures. The manufacturer needed to address the issue to avoid disruptions to production.

The initial goal was to keep noise levels in the workshop office at or below 45 dB(A). Since the production line used equipment similar to that at the company’s Foshan facility, Soundbox assessed noise sources there, including material handling, stamping, motors, cutting and packaging equipment.

Through online meetings, Soundbox and the customer reviewed the proposed solution and discussed adjustments to the enclosure layout. The customer’s management team also visited Soundbox’s showroom, laboratory and production facilities to learn more about the proposed design and relevant projects.

Following these discussions and a review of project costs, the team focused on three priority noise areas and set a revised target of 70 dB(A) or below, measured 1 meter outside the acoustic enclosures.

Designing Around the Needs of the Production Line

With the revised noise control target in place, Soundbox refined the acoustic enclosure design to suit the production line’s layout and requirements.

The team adjusted the enclosure structure and panel thickness, incorporating composite damping panels to improve sound insulation. Sealing around joints and acoustic doors was also reinforced to help limit sound leakage.

The design process also considered equipment layouts, installation dimensions and maintenance access, helping coordinate the enclosures with the existing production line.

Before-and-after comparison of industrial production equipment with a custom acoustic enclosure installed.

Putting the Enclosures to the Test

With a tight delivery schedule, Soundbox coordinated design, procurement and manufacturing in parallel. The acoustic enclosures were then assembled in Foshan for testing.

During initial acceptance testing, noise from equipment outside the treated areas affected the measurements. Some of these machines could not be shut down independently, making it difficult to assess the enclosures under the intended test conditions.

To address the interference, the team clarified the testing requirements, including a background noise limit of 60 dB(A) for surrounding sources. The enclosures subsequently passed third-party acceptance testing and met the agreed noise control requirements.

On-site inspection and testing of industrial acoustic enclosures at the production facility.

From Design to Delivery

By February 2026, the custom acoustic enclosures had been manufactured, assembled and tested in Foshan, meeting the agreed noise control requirements. Following acceptance, the enclosures were dismantled, packed and shipped to the customer’s production facility in Hungary.

Custom acoustic enclosures packed and ready for shipment to Hungary.

From the initial site assessment to acoustic design, manufacturing and testing, the project brought together Soundbox’s technical expertise and cross-team coordination to deliver a solution tailored to the production line’s requirements. It also marked an important step in Soundbox’s experience with international industrial noise control projects.